LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (3.0L Turbo Diesel (Service Information)) >> Valve Timing >> TENSIONER, Engine Timing >> Removal

TENSIONER, Engine Timing: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the lower timing cover. Refer to COVER(S), ENGINE TIMING, REMOVAL .
    GC0146657Courtesy of CHRYSLER GROUP, LLC
  3. Pushing back the tensioner piston, and install Tensioner Pin (special tool #VM.10359A, Pin, Tensioner) (2).
  4. Remove the bolts (1) and the right timing chain tensioner (3).
    GC0146661Courtesy of CHRYSLER GROUP, LLC
  5. Pushing back the piston, and install Tensioner Pin (special tool #VM.10359A, Pin, Tensioner) (2).
  6. Remove the bolts (1) and the left timing chain tensioner (3).
scientia non olet · About LEMON Manuals