Special Tools

WARNING: This page is about a different variant/trim than selected.

Courtesy of CHRYSLER GROUP, LLC	10224 - Adapter, Valve Spring (Originally Shipped In Kit Number(s) 10223.)
Courtesy of CHRYSLER GROUP, LLC	10368 - Set, Universal Protective Cap
Courtesy of CHRYSLER GROUP, LLC	8534C - Fixture, Driveline Support (Originally Shipped In Kit Number(s) 8534, 8534B, 8849, 9565.)
Courtesy of CHRYSLER GROUP, LLC	C-3339A - Set, Dial Indicator (Originally Shipped In Kit Number(s) 9202.)
Courtesy of CHRYSLER GROUP, LLC	C-3422-D - Compressor, Valve Spring
Courtesy of CHRYSLER GROUP, LLC	D-115-2A - Block, Scooter (Originally Shipped In Kit Number(s) 9329-SUP, 9515-SUP, 9516-SUP, 9517-SUP, 9518, 9519, 9540-SUP, 9541-SUP, 9694, 9926.)
Courtesy of CHRYSLER GROUP, LLC	VM.10338A - Tool, Camshaft Timing
Courtesy of CHRYSLER GROUP, LLC	VM.10338-1 - Timing Tool, Camshaft (Right)
Courtesy of CHRYSLER GROUP, LLC	VM.10338-2 - Timing Tool, Camshaft (Left)
Courtesy of CHRYSLER GROUP, LLC	VM.10339 - Tool, Crankshaft Timing
Courtesy of CHRYSLER GROUP, LLC	VM.10340-1 - Guide, Front Seal
Courtesy of CHRYSLER GROUP, LLC	VM.10340-2 - Installer Tool, Front Seal
Courtesy of CHRYSLER GROUP, LLC	VM.10341-1 - Guide, Rear Seal
Courtesy of CHRYSLER GROUP, LLC	VM.10341-2 - Installer Tool, Rear Seal
Courtesy of CHRYSLER GROUP, LLC	VM.10342 - Tool, Crankshaft Bearing Positioning
Courtesy of CHRYSLER GROUP, LLC	VM.10343-1 - Alignment Tool, Cylinder Head (Right Intake)
Courtesy of CHRYSLER GROUP, LLC	VM.10343-2 - Alignment Tool, Cylinder Head (Left Intake)
Courtesy of CHRYSLER GROUP, LLC	VM.10343-3 - Alignment Tool, Cylinder Head (Left Exhaust)
Courtesy of CHRYSLER GROUP, LLC	VM.10343-4 - Alignment Tool, Cylinder Head (Right Exhaust)
Courtesy of CHRYSLER GROUP, LLC	VM.10344 - Tool, Oil Separator Remover/Installer
Courtesy of CHRYSLER GROUP, LLC	VM.10357 - Adapter, Compression Test
Courtesy of CHRYSLER GROUP, LLC	VM.10359A - Pin, Tensioner
Courtesy of CHRYSLER GROUP, LLC	VM.10360A-1 - Bracket, Engine Lifting (Left Rear) (Originally Shipped In Kit Number(s).)
Courtesy of CHRYSLER GROUP, LLC	VM.10360A-2 - Bracket, Engine Lifting (Right) (Originally Shipped In Kit Number(s).)
Courtesy of CHRYSLER GROUP, LLC	VM.10360A-3 - Bracket, Engine Lifting (Left Front) (Originally Shipped In Kit Number(s).)
Courtesy of CHRYSLER GROUP, LLC	VM.10362A - Tool, Bedplate Removal (Originally Shipped In Kit Number(s) 10488.)
Courtesy of CHRYSLER GROUP, LLC	2014300090 - Adapter, Engine Lifting Bracket (Originally Shipped In Kit Number(s) 2014300090.)