LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (3.0L Turbo Diesel (Service Information)) >> Lubrication >> Sensor, Oil Pressure >> Removal

Sensor, Oil Pressure: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect and isolate the negative battery cable.
    GC0146436Courtesy of CHRYSLER GROUP, LLC
  2. Remove the engine cover (1).
    GC0157454Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the engine oil pressure sensor harness connector (2).
  4. Remove the engine oil pressure sensor (3).
scientia non olet · About LEMON Manuals