LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (3.0L Turbo Diesel (Service Information)) >> Cylinder Head >> Lifter(S), Hydraulic >> Removal

Lifter(S), Hydraulic: Removal

WARNING: This page is about a different variant/trim than selected.
GC0146669Courtesy of CHRYSLER GROUP, LLC
  1. Remove the appropriate camshafts. Refer to CAMSHAFT, ENGINE, REMOVAL .
    NOTE:

    When the lifters are removed from the engine, they must be stored upright and in clean conditions.

  2. Remove the rocker arm (1) and lifter (2) assembly.
scientia non olet · About LEMON Manuals