Lifter(S), Hydraulic: Installation
WARNING: This page is about a different variant/trim than selected.
CAUTION:
When the lifters are removed from the engine, they must be stored upright and in clean conditions. Install the rocker arms and lifters in the same location as when removed.
CAUTION:
Replacement of the camshaft will also require replacement of the rocker arms and lifters.
NOTE:
Rocker arms and lifters must be installed in the same location as when removed.
- Install the lifter (2) and the rocker arm (1) in the same location as noted during removal.
- Install the camshaft(s). Refer to CAMSHAFT, ENGINE, INSTALLATION .