LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (3.0L Turbo Diesel (Service Information)) >> Air Intake System >> Body, Air Cleaner >> Removal >> Intake Air Tube

Intake Air Tube

WARNING: This page is about a different variant/trim than selected.
GC0146436Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Remove the engine cover (1).
    GC0146779Courtesy of CHRYSLER GROUP, LLC
  3. Remove the CCV hose (1) from upper timing cover. (During removal of the CCV hose do NOT disconnect CCV hose at the Air Tube.)
    GC0146788Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the CCV hose heater harness connector (4).
  5. Loosen clamp and remove intake air tube from air cleaner body.
    GC0145586Courtesy of CHRYSLER GROUP, LLC
  6. Remove the cowl extension silencer (1) and the side extensions (2, 5). Refer to SILENCER, COWL EXTENSION, REMOVAL .
  7. Loosen clamp and remove intake air tube from turbocharger.