LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (6.4L Engine (Service Information)) >> Lubrication >> Jet, Piston Oil Cooler >> Removal

Jet, Piston Oil Cooler: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the oil pan and oil pump pickup tube. Refer to PAN, OIL .
    GC0080329Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    It may be necessary to rotate the engine crankshaft to access the piston oil cooler jet retaining bolts.

  2. Remove the piston oil cooler jet retaining bolt (2).
  3. Remove the piston oil cooler jet (1).
scientia non olet · About LEMON Manuals