LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (6.4L Engine (Service Information)) >> Lubrication >> Jet, Piston Oil Cooler >> Installation

Jet, Piston Oil Cooler: Installation

WARNING: This page is about a different variant/trim than selected.
GC0080329Courtesy of CHRYSLER GROUP, LLC
  1. Position the piston oil cooler jet (1).
  2. Install the piston oil cooler jet retaining bolt 2) and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS  .
  3. Install the engine oil pump pickup tube and oil pan. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals