Control Valve, Oil Intake: Removal

WARNING: This page is about a different variant/trim than selected.

GC0144407

Courtesy of CHRYSLER GROUP, LLC

NOTE:

The Variable Valve Timing Solenoid (VVTS) (3) is located under the intake manifold.

Remove intake manifold. Refer to INSTALLATION .
Disconnect VVTS electrical connector (1).
Remove VVTS retaining bolt (2).

Courtesy of CHRYSLER GROUP, LLC

NOTE:
To remove the VVTS, the engine must be at room temperature.
Rotate the VVTS to break the seal and remove.