LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (6.4L Engine (Service Information)) >> Engine Mounting >> Insulator, Engine Mount, Rear >> Removal >> Manual Transmission

Manual Transmission

WARNING: This page is about a different variant/trim than selected.
Fig 1: Transmission Cross Member Removal/Installation Sequence (Manual Transmission)
GC0144615Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle.
  2. Using a suitable jack, support the transmission.
  3. Remove the rear transmission mount isolator nuts (1).
  4. Remove the rear cross member retaining bolts (2) and remove the cross member.
    GC0144616Courtesy of CHRYSLER GROUP, LLC
  5. Remove the rear transmission mount isolator (2) retaining bolts (1) and remove the isolator.
scientia non olet · About LEMON Manuals