LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (6.4L Engine (Service Information)) >> Engine Mounting >> Insulator, Engine Mount, Rear >> Removal >> Automatic Transmission

Automatic Transmission

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0095619Courtesy of CHRYSLER GROUP, LLC
  2. Using a suitable jack, support the transmission.
  3. Remove the rear transmission mount isolator bolts (2).
  4. Remove the rear cross member retaining bolts (1, 3) and remove the cross member (4).
    GC0080320Courtesy of CHRYSLER GROUP, LLC
  5. Remove the rear transmission mount isolator (3) retaining bolts (1) and remove the isolator.
  6. If required, remove the rear transmission mount bracket (2) retaining bolts from the transmission and remove the bracket.
scientia non olet · About LEMON Manuals