Plate, Skid, Front: Installation

Courtesy of CHRYSLER GROUP, LLC

INSTALLATION - STANDARD MODELS

1. Install the skid plate (2).
2. Install the front bolts (1) and tighten to 55 N.m (41 ft. lbs.).
3. Install the rear bolts loosely.
4. Install the front suspension skid plate, Refer to PLATE, SKID, TRANSFER CASE, INSTALLATION .

Courtesy of CHRYSLER GROUP, LLC

INSTALLATION - TRACKHAWK MODELS

1. Install the front skid plate (2) into the front fascia (1).

   Courtesy of CHRYSLER GROUP, LLC

2. Install the two rear fasteners (1).
3. Install the 11 front fasteners (2).

   Courtesy of CHRYSLER GROUP, LLC

4. Install the four fasteners (1) into each wheel well.

   Courtesy of CHRYSLER GROUP, LLC

5. Install new outer spat rivets (1).
6. Install the front suspension skid plate, Refer to PLATE, SKID, TRANSFER CASE, INSTALLATION .