LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2018 >> Grand Cherokee Laredo, RWD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Bumpers >> Under Body Protection >> Plate, Skid, Front Suspension >> Installation

Plate, Skid, Front Suspension: Installation

GC0175267Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle.
  2. Install the skid plate (2) over the front bolts and slide into place.
  3. Install the rear bolts and tighten to 28 N.m (21 ft. lbs.).
  4. Tighten the front bolts to 28 N.m (21 ft. lbs.).
scientia non olet · About LEMON Manuals