LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (NV241 Or Transfer Case (Service Information)) >> Sensor, Position >> Removal

Sensor, Position: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle.
  2. Disengage the transfer case position sensor connector from the position sensor.
  3. Remove the position sensor from the transfer case.
scientia non olet · About LEMON Manuals