LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (NV241 Or Transfer Case (Service Information)) >> Disassembly >> Shift Forks

Shift Forks

WARNING: This page is about a different variant/trim than selected.
GC0131324Courtesy of CHRYSLER GROUP, LLC
1 - FRONT CASE HALF
2 - FRONT OUTPUT SHAFT
  1. Remove front output shaft (2) from bearing in case (1).
    GC0131325Courtesy of CHRYSLER GROUP, LLC
    1 - FRONT CASE HALF
    2 - SHIFT RAIL
  2. Remove the shift rail (2) from the shift forks.
    GC0131326Courtesy of CHRYSLER GROUP, LLC
    1 - MODE FORK
    2 - MODE SLEEVE
  3. Remove mode fork (1), mode sleeve (2). Note which way sleeve fits in fork (long side of sleeve goes to front).
    GC0131327Courtesy of CHRYSLER GROUP, LLC
    1 - RANGE FORK
    2 - RANGE HUB
  4. Remove range fork (1) and hub (2) as an assembly. Note fork position for installation reference.
    GC0131328Courtesy of CHRYSLER GROUP, LLC
    1 - FRONT CASE HALF
    2 - SHIFT SECTOR
  5. Remove shift sector (2).
scientia non olet · About LEMON Manuals