Section 1 (NV241 Or Transfer Case (Service Information)): Disassembly: MAINSHAFT

Courtesy of CHRYSLER GROUP, LLC

1 - MAINSHAFT

2 - DRIVE SPROCKET

3 - SNAP-RING

1. Remove the snap-ring (3) that secures the chain drive sprocket (2) onto mainshaft (1). Use standard (instead of parallel jaw) snap-ring pliers to remove this snap-ring.

   Courtesy of CHRYSLER GROUP, LLC

   1 - MAINSHAFT

   2 - DRIVE SPROCKET

2. Remove drive sprocket (2).

   Courtesy of CHRYSLER GROUP, LLC

   1 - MAINSHAFT

   2 - SLIDING CLUTCH GEAR

3. Remove the sliding clutch gear (2) from the mainshaft (1).

   Courtesy of CHRYSLER GROUP, LLC

   1 - MAINSHAFT

   2 - MODE HUB

   3 - SNAP-RING

4. Rotate the mainshaft (1) 180° and remove the mode hub (2) snap-ring (3).

   Courtesy of CHRYSLER GROUP, LLC

   1 - MAINSHAFT

   2 - MODE HUB

5. Remove the mode hub (2) from the mainshaft.

   Courtesy of CHRYSLER GROUP, LLC

   1 - MAINSHAFT

   2 - DRIVE SPROCKET DRIVE HUB

6. Remove the drive sprocket drive hub (2) from the mainshaft (1).