Set Condition
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
This code will set, if the ORC and the Driver Door Pressure Sensor do not establish and maintain valid data communications. The DTC will become Active after the fault has set for a minimum of 2.5 seconds. The DTC will go to Stored after the ORC to Driver Door Pressure Sensor communication fault has been removed or the suspect pressure sensor has been replaced for 2.5 seconds. The Multifunction Indicator Lamp (MIL) will set in the instrument cluster.