Diagnostic Test

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR AN ACTIVE DTC

With the scan tool, read DTCs and record on the repair order.
Record the Environmental Data.
With the scan tool, erase DTCs.
Cycle the Driver Seat Switch in all directions several times.
Wait one minute.
With the scan tool, read MSMD DTCs.
Is the same DTC active?

Yes
- Replace the Driver Seat Switch in accordance with the Service Information. Refer to SWITCH, SEAT, REMOVAL .
- Perform POWER SEAT SYSTEM VERIFICATION TEST. Refer to POWER SEAT SYSTEM VERIFICATION TEST .
No
- Perform the TESTING FOR AN INTERMITTENT CONDITION procedure. Refer to TESTING FOR AN INTERMITTENT CONDITION .