Set Condition
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Pressure Regulator Monitoring: A failure is detected if one of the following conditions occur:
An short to ground failure is detected if the ASIC indicates a short to ground failure.
A short to battery or open circuit failure is detected if the ASIC indicates a short to battery or open circuit failure.
Solenoid Monitoring: A failure is detected if one of the following conditions occur:
An short to ground or open circuit failure is detected if the ratio between the voltage at the solenoid valve and the output stages power supply is above a calibrated threshold.
A short to battery failure is detected if the ratio between the voltage at the solenoid valve and the output stages power supply is below a calibrated threshold.