Outlet, Power, 115 V: Removal
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Using a trim stick remove the rear center console bezel.
- Remove the retainers securing the duct work to the rear center console panel.
- Disconnect the wire harness connector (1) for the 115v power outlet (2).
- Release the clips holding the 115v power outlet and push through the panel.