Diagnostic Test

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Replace the Occupant Classification Module (OCM)

Make sure the battery is fully charged.
Turn the ignition off, wait ten seconds and turn ignition on.
With the scan tool, read the OCM DTC.
Did the scan tool display active or stored DTC?

Yes
- Check and repair OCCUPANT CLASSIFICATION MODULE (OCM) codes.
  .
- Perform the OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST. Refer to OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST .
No
- Perform the OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST. Refer to OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST .