Set Condition
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Either of the following conditions is true for more than 2.5 seconds:
- No messages received from PTU Shift Actuator for more than 50 ms.
- No messages received from PTU Shift Actuator after ignition was turned off for 60 minutes and after the PTU Shift Actuator was shut down due to an over-temperature condition. (When PTU Shift Actuator is shut-down due to an over-temp condition and then the customer turns the Ignition off. If ignition has been off for more than 60 minutes, giving the actuator enough time to cool off, then turned back on and the PTU actuator still does not communicate, this DTC will set.)