Diagnostic Test

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

ADAPTIVE CRUISE CONTROL MODULE NOT PROGRAMED

This Diagnostic Trouble Code will set if the Body Control Module (BCM) is not configured for Adaptive Cruise Control (ACC).

Program the BCM.

Program the BCM with the correct sales code in accordance with the service information. Refer to MODULE PROXI REQUIREMENTS .
Verify that both the ACC Horizontal and Vertical alignments are correct. Perform the Adaptive Speed Control Module Alignment procedures. Refer to MODULE, ADAPTIVE CRUISE CONTROL (ACCM), MODULE PROGRAMMING .
Perform the ADAPTIVE CRUISE CONTROL VERIFICATION TEST. Refer to STANDARD PROCEDURE .