Possible Causes
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
| Possible Causes |
|---|
| PROXI/CONFIGURATION MISMATCH WAS DETECTED |
| USED CONTROLLER INSTALLED WITH WRONG CONFIGURATION |
| BODY CONTROL MODULE (BCM) NOT PROPERLY PROGRAMED OR WAS REPLACED AND NOT PROGRAMED |
| MODULE WAS ADDED OR SUBTRACTED WITHOUT CHANGING THE SALES CODE |
| THE VIN WAS NOT PROPERLY PROGRAMED BEFORE THE PROXI ALIGNMENT PROCEDURE WAS PERFORMED DURING PCM REPLACEMENT |
| POWERTRAIN CONTROL MODULE (PCM) |
Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE .