LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Base Brakes (Service Information)) >> Parking Brake >> Switch, Electric Park Brake >> Installation

Switch, Electric Park Brake: Installation

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0159259Courtesy of CHRYSLER GROUP, LLC
  1. Install the Electric Park Brake (EPB) switch (3) to the shift bezel (4).
  2. Install the screws (2) securing the EPB switch (3) to the shift bezel (4).
  3. Connect the electrical connector (1).
  4. Install the shift bezel. Refer to BEZEL, SHIFTER, INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals