LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Base Brakes (Service Information)) >> Hydraulic/Mechanical >> Rotor, Brake >> Removal >> Front Brake Rotor

Front Brake Rotor

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Before proceeding, refer to CAUTION  and WARNING .

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the wheel mounting bolts, then the tire and wheel assembly.
    GC0159827Courtesy of CHRYSLER GROUP, LLC
  3. Remove the two brake caliper adapter bolts (2).
    NOTE:

    The bolts are one time use and need to be 

    DISCARDED 

    .

  4. Remove the disc brake caliper and adapter as an assembly and hang it out of the way using wire or a bungee cord. Use care not to overextend the brake hose when doing this.
  5. Remove the rotor retaining bolt and remove the rotor from the hub and bearing.
scientia non olet · About LEMON Manuals