Nozzle, Washer: Removal: Front
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- From the underside of the hood (1), remove the push-in retainers that secure the rear edge of the hood silencer pad to the inner hood reinforcement as necessary to access the washer nozzle (2) plumbing connections.
- From the underside of the hood, disconnect the washer plumbing (3) fitting from the barbed nipple of the washer nozzle.
- From the underside of the hood, release the integral latch features of the washer nozzle and push the nozzle out through the mounting hole toward the top side of the hood.
- Remove the washer nozzle from the top of the hood panel.