Coil, Ignition: Removal: 2.4L
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of CHRYSLER GROUP, LLC
|
NOTE:
Prior to removing coil, spray compressed air around coil top to make sure no dirt drops into the spark plug tube.
The electronic ignition coil attaches directly to the valve cover.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Disconnect electrical connector from ignition coil.
 Courtesy of CHRYSLER GROUP, LLC
|
- Remove ignition coil mounting bolts.
 Courtesy of CHRYSLER GROUP, LLC
|
- Remove ignition coil.