LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Ignition System (Service Information)) >> Capacitor, Ignition >> Installation >> 2.4L

Capacitor, Ignition: Installation: 2.4L

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0155984Courtesy of CHRYSLER GROUP, LLC
  1. Install ignition capacitor to the front of the cylinder head (2) and bolt (3), tighten bolt to the proper. Refer to TECHNICAL SPECIFICATIONS .
  2. Connect electrical connector (1).
  3. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals