LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 ((Amplifier (Amp) - Electrical Diagnostics - Base)) >> DTC Troubleshooting >> B1488-00-Cabin Eq Mismatch Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

If the Cabin Equalization Curve number message from the Body Control Module (BCM) is not the same as the Cabin Equalization Curve number stored in the Amplifier for 10 consecutive cycles, then the Amplifier (AMP) will set this DTC.

scientia non olet · About LEMON Manuals