LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Audio/Video/Entertainment/Connectivity (Service Information)) >> Radio >> Operation

Section 61 (Audio/Video/Entertainment/Connectivity (Service Information)): Radio: Operation

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

The radio becomes operational when it receives a wake up signal over the Controller Area Network - Interior High Speed (CAN-IHS) data bus indicating the status of the ignition switch is On or Accessory. For further information on the operation of the vehicles radio/media system in the vehicle, see the heading for the appropriate audio system option in the User Guide or the Owner Manual. See the Uconnect® web site (http://www.driveuconnect.com/) for more information, or refer to the Owner's link on the vehicle brand web site (http://ramtrucks.com/en/) for copies of those publications.

The radio uses a rear quarter glass antenna for AM/FM signal reception and, depending upon vehicle optional equipment, a roof mounted combination antenna that can receive Global Positioning System (GPS), satellite radio and cellular telephone signals.

Depending upon the audio system options, a radio can play music from many different media sources. The media can be played by connecting the source to the audio system via a 3.5 millimeter auxiliary (AUX) port, a Universal Serial Bus (USB) port, a remote Secure Data (SD) card slot, a external Compact Disc (CD) player or through wireless Bluetooth™ streaming, refer to the Uconnect® web site (http://www.driveuconnect.com/) for compatibility.

NOTE:

USB devices (e.g., camera memory USB adaptors, etc. excluding Apple products) must comply with the MSD (Mass Storage Device) standard. This remote USB port can provide power to the inserted device.