Module, External Disc: Removal
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the floor console. Refer to CONSOLE, FLOOR, REMOVAL
.
- Disconnect the wire harness connector.
- Remove the retaining screws (1) and disengage the storage bin (2) from the floor console.
- Remove the disc player (2) mounting fasteners (1).
- Remove the disc player from the storage bin.