LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Audio/Video/Entertainment/Connectivity (Service Information)) >> Media Hub >> Removal

Media Hub: Removal

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the console bezel. Refer to BEZEL, SHIFTER, REMOVAL .
    GC0160062Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wire harness connectors (1).
  4. Compress the retaining clips (3) to release the media hub (2) from the console bezel.
scientia non olet · About LEMON Manuals