Shroud, Steering Column, Lower: Removal
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Push the column tilt lever downward.
- Remove the lower shroud screws (1), (3).
- Separate the lower steering column shroud from the upper steering column shroud by pressing on the edges of the shrouds.
- Disengage the gap hider from the lower steering column shroud.
- Disconnect the wire harness routing clip (1) from the lower steering column shroud.
- Remove the lower steering column shroud.