LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Emissions Control) >> Exhaust Gas RECIRCULATION, Diesel >> Valve, Exhaust Gas RECIRCULATION (EGR) >> Removal >> 2.2L Diesel

2.2L Diesel

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the engine cover. Refer to the appropriate service article .
    GC0169926Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the EGR valve wire harness connector (1).
    GC0169956Courtesy of CHRYSLER GROUP, LLC
  4. Remove the bolts (1) and the EGR valve (2).
  5. Remove and discard both the gaskets.