LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Emissions Control) >> Exhaust Gas RECIRCULATION, Diesel >> Sensor, EGR Temperature >> Removal >> Removal 2.2L

Removal 2.2L

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the bell pan. Refer to BELLY PAN, REMOVAL .
    GC0162325Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the low pressure EGR cooler temperature sensor wire harness connector (1).
  4. Remove the low pressure EGR cooler temperature sensor (2) from the EGR cooler.
scientia non olet · About LEMON Manuals