Valve, Purge Control: Removal: 3.2L
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
The duty cycle purge solenoid (2) is located in the engine compartment mounted on the intake manifold.
- Carefully pull the solenoid assembly straight up from the tongue-type bracket without bending the two vapor lines.
- Disconnect electrical wiring connector (4) at solenoid.
- Disconnect vapor line quick-connect fitting (5) at solenoid.
- Disconnect vapor line (1) at the at the throttle body.