LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 ((Radio Frequency (RF Hub) Module - Electrical Diagnostics)) >> DTC Troubleshooting >> P0704-2A-Clutch Switch Input Circuit-Stuck >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

This DTC applies to manual transmission only, when the KIN button is pushed to START, the vehicle will crank without the driver pressing the clutch pedal; and will not be able to set the ignition state to ACCESSORY.

Default Actions: 

Vehicle will not start.