Set Condition
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
If there isn't enough confidence to determine the location of each sensor when all TPM sensor LOCALIZATION messages have been sent, the localization was not successful. The sensor location undetermined DTC is set when the localization sequence is not completed successfully on the first attempt for split placard (heavy duty) vehicles or after ten repeated location sequences not successful on single placard vehicles.
Default Actions:
TPM warning light on, chime sounds.
"System Not Programmed" message in the EVIC pressure values replaced with dashes.