Diagnostic Test

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

VERIFY DTC IS ACTIVE

NOTE:

Make sure the IOD fuse is installed and the battery is fully charged before proceeding.

Turn the ignition on.
With the scan tool, read active DTCs.
Does the scan tool display this DTC as ACTIVE?

Yes
- Refer to U0209-87-LOST COMMUNICATION WITH MEMORY SEAT CONTROL MODULE - MISSING MESSAGE and perform the U0209-Lost Communication with Memory Seat Control Module diagnostic procedure.
No
- Refer to STORED LOST COMMUNICATION DTCS and perform the Stored Lost Communication DTCs diagnostic procedure.