LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Engine Cooling System) >> Transmission >> Cooler, Transmission Oil >> Installation

Cooler, Transmission Oil: Installation

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0159856Courtesy of CHRYSLER GROUP, LLC
  1. Position the transmission oil cooler (2) to the condenser.
  2. Tighten the bolts (1, 3) to 9 N.m (80 in. lbs.).
  3. Install the transmission cooler (4, 5) lines to the transmission cooler.
  4. Check transmission fluid level, add as necessary.
scientia non olet · About LEMON Manuals