Pulley, Idler: Installation: 3.2L
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- If removed, install the lower idler pulley (5) and tighten the bolt (4) to 27 N.m (20 ft. lbs.).
- If removed, install the upper idler pulley (1) and tighten the bolt (2) to 27 N.m (20 ft. lbs.).
- Install the serpentine belt (3). Refer to BELT, SERPENTINE, INSTALLATION .