LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Fuel System) >> Fuel Injection, Gas >> Sensor, Manifold Air Pressure (Map) >> Removal >> 2.4L

Sensor, Manifold Air Pressure (Map): Removal: 2.4L

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
    GC0169946Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the Manifold Absolute Pressure (MAP) sensor wire harness connector (2).
  4. Rotate the MAP sensor 90° counter clockwise and remove sensor (1).
scientia non olet · About LEMON Manuals