Injector(S), Fuel: Installation: 2.4L
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Apply a light coating of clean engine oil to the upper O-ring.
- Install the fuel injector (3) into fuel rail (1).
- Install the fuel injector retaining clip (2).
- Install the fuel rail. Refer to RAIL, FUEL, INSTALLATION or RAIL, FUEL, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
- Use the scan tool to pressurize the fuel system. Check for leaks.