LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Fuel System) >> Fuel Injection, Diesel >> Sensor, Oxygen >> Removal >> 2.2L Diesel 1/2

2.2L Diesel 1/2

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
    GC0169996Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the oxygen sensor wire harness connector (1) and remove the wire harness connector from the support bracket.
    GC0169918Courtesy of CHRYSLER GROUP, LLC
  4. Open the retaining clip and remove the wire from clip (1).
    GC0169973Courtesy of CHRYSLER GROUP, LLC
  5. Remove the oxygen sensor (1).