2.2L Diesel 1/1
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the engine cover. Refer to the appropriate service information article.
.
- Disconnect the oxygen sensor wire harness connector (3) and remove the wire harness connector from bracket.
- Remove the oxygen sensor wire from retainer (2).
- Remove the oxygen sensor (1).