LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Fuel System) >> Fuel Injection, Diesel >> Sensor, Oxygen >> Installation >> 2.0L Diesel 1/1

2.0L Diesel 1/1

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0147952Courtesy of CHRYSLER GROUP, LLC
  1. Install the oxygen sensor (1) and tighten to the proper torque. Refer to TORQUE SPECIFICATIONS - 2.0L  .
    GC0169963Courtesy of CHRYSLER GROUP, LLC
  2. Install the oxygen sensor wire harness connector pick-tail (1) to the support bracket (3) and connect the oxygen sensor wire harness connector (2).
  3. Install the engine cover. Refer to TORQUE SPECIFICATIONS - 2.0L  .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals