Tube, Fuel Tank Filler: Installation
WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Install the fuel filler tube (1) to the fuel door housing assembly.
- Install the filler tube mounting bracket nut (2). Tighten bolt to the proper torque. Refer to TORQUE SPECIFICATIONS
.
- Install the fuel filler tube (3) to the fuel tank (1). Tighten hose clamp (2) to the proper torque. Refer to TORQUE SPECIFICATIONS .
- Install the right rear wheelhouse splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, INSTALLATION
.
- Install the fuel cap (1).
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.