LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Fuel System) >> Fuel Delivery, Diesel >> Solenoid, Fuel Quantity >> Removal >> 2.2L Diesel

2.2L Diesel

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

No sparks, open flames or smoking. Risk of poisoning from inhaling and swallowing fuel. Risk of injury to eyes and skin from contact with fuel. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing.

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the engine cover. Refer to the appropriate service information article. .
    GC0169944Courtesy of CHRYSLER GROUP, LLC
  3. Remove the fuel injection pump insulator (1).
    GC0177003Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the fuel quantity solenoid wire harness connector (1).
    GC0177006Courtesy of CHRYSLER GROUP, LLC
  5. Remove the fasteners (1) and the fuel quantity solenoid (2).