LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2017 >> Wrangler Sahara, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (3.2L Engine (Service Information)) >> Lubrication >> Sensor, Oil Temperature >> Installation

Sensor, Oil Temperature: Installation

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0162119Courtesy of CHRYSLER GROUP, LLC
  1. Install the oil temperature sensor (1) and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS  .
  2. Connect the oil temperature sensor wire harness connector (2).
  3. Install the upper and lower intake manifolds. Refer to MANIFOLD, INTAKE, INSTALLATION .
scientia non olet · About LEMON Manuals